티스토리 뷰

안녕하세요~!!


지난시간에 우리는 컴퓨트 노드의 인스턴스 생성을 담당하는 Nova-compute를 설치하였습니다. 이번시간에는 네트워크를 담당하는 Neutron과 블록 스토리지를 관리하는 Cinder를 설치해보도록 하겠습니다.



Neutron 컴퓨트 설치

컴퓨트 노드에 생성되는 인스턴스의 IP를 할당하고 다른 컴퓨트 노드간의 인스턴스들이 서로 통신할 수 있도록 Neutron 컴퓨트를 설치하겠습니다.

 

1.     /etc/sysctl.conf 파일을 열어 다음과 같은 내용을 추가합니다. 네트워크 노드와 달리 컴퓨트 노드에서는 IP를 포워딩 할 일이 없으므로 rp_filter만 설정합니다.

$ sudo vi /etc/sysctl.conf
net.ipv4.conf.all.rp_filter=0
net.ipv4.conf.default.rp_filter=0

 

2.     수정된 sysctl.conf 파일의 내용을 sysctl 명령을 이용해서 시스템에 적용합니다.

$ sudo sysctl –p
net.ipv4.conf.all.rp_filter=0
net.ipv4.conf.default.rp_filter=0

 

3.     Neutron, ML2, OpenvSwitch를 설치합니다.

$ sudo apt-get install neutron-common neutron-plugin-ml2 neutron-plugin-openvswitch-agent \n
 openvswitch-datapath-dkms

 

4.     설치가 완료되면 /etc/neutron/neutron.conf 파일을 열어 다음과 같이 RabbitMQ, Neutron 플러그인 정보, Keystone 정보를 수정합니다.

$ sudo vi /etc/neutron/neutron.conf
[DEFAULT]
...
auth_strategy = keystone
...
rpc_backend = neutron.openstack.common.rpc.impl_kombu
rabbit_host = 10.10.15.11
rabbit_password = rabbitpass
...
core_plugin = ml2
service_plugins = router
allow_overlapping_ips = True
 
[keystone_authtoken]
...
auth_uri = http://10.10.15.11:5000
auth_host = 10.10.15.11
auth_protocol = http
auth_port = 35357
admin_tenant_name = service
admin_user = neutron
admin_password = neutronpass

 

5.     /etc/neutron/plugins/ml2/ml2_conf.ini 파일에 네트워크 타입과 메커니즘 드라이버 정보를 다음과 같이 입력합니다.

$ sudo vi /etc/neutron/plugins/ml2/ml2_conf.ini [ml2] type_drivers = gre tenant_network_types = gre mechanism_drivers = openvswitch [ml2_type_gre] tunnel_id_ranges = 1:1000 [ovs] local_ip = 10.0.10.31 #eth1에 해당하는 IP 입력 tunnel_type = gre enable_tunneling = True [securitygroup] firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver enable_security_group = True

 

6.     환경설정이 완료되면 openvswitch을 재시작합니다.

$ sudo service openvswitch-switch restart

 

7.     서로 다른 컴퓨트 노드간의 인스턴스 네트워킹을 담당할 br-intOpenvswitch에 추가합니다.

$ sudo ovs-vsctl add-br br-int

 

8.     Neutron은 인스턴스에 네트워크 IP를 할당 해야 하는 밀접한 관련이 있으므로 /etc/nova/ nova.conf를 열어 다음과 같이 Neutron 정보를 추가합니다.

$ sudo vi /etc/nova/nova.conf
[DEFAULT]
...
network_api_class = nova.network.neutronv2.api.API
neutron_url = http://10.10.15.11:9696
neutron_auth_strategy = keystone
neutron_admin_tenant_name = service
neutron_admin_username = neutron
neutron_admin_password = neutronpass
neutron_admin_auth_url = http://10.10.15.11:35357/v2.0
linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver
firewall_driver = nova.virt.firewall.NoopFirewallDriver
security_group_api = neutron

 

9.     Neutron 정보를 추가했으면 이번에는 nova-computeneutron-plugin을 재시작합니다.

$ sudo service nova-compute restart
nova-compute stop/waiting
nova-compute start/running, process 23167
$ sudo service neutron-plugin-openvswitch-agent restart
neutron-plugin-openvswitch-agent stop/waiting
neutron-plugin-openvswitch-agent start/running, process 23346

 


 

Cinder 볼륨 설치

컨트롤러 노드에서 Cinder 서버를 설치했다면 컴퓨트 노드에서는 Cinder 볼륨을 설치합니다. Cinder 볼륨은 블록 스토리지용 디스크가 별도로 있는 노드에서도 설치가 가능합니다.

 

1.     먼저 lvm을 설치합니다.

$ sudo apt-get install lvm2

 

2.     Fdisk 명령을 이용해서 스토리지용 디스크가 있는지 확인합니다.

$ sudo fdisk -l
 
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000d9e26
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    37974015    18985984   83  Linux
/dev/sda2        37976062    41940991     1982465    5  Extended
/dev/sda5        37976064    41940991     1982464   82  Linux swap / Solaris
 
Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders, total 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
 
Disk /dev/sdb doesn't contain a valid partition table

 

3.     확인된 디바이스로 물리 볼륨(Physical Volume)을 생성합니다.

$ sudo pvcreate /dev/sdb

 

4.     물리 볼륨 생성이 완료되면 볼륨 그룹(Volume Group) cinder-volumes라는 이름으로 다음과 같이 생성합니다.

$ sudo vgcreate cinder-volumes /dev/sdb
Physical volume "/dev/sdb" successfully created


5.     볼륨 그룹을 생성한 후 /etc/lvm/lvm.conf 파일을 열어 LVM이 기존 디바이스에 접근하지 못하도록 다음과 같이 Filter을 설정합니다.

$ sudo vi /etc/lvm/lvm.conf
devices {
...
filter = [ "a/sda1/", "a/sdb/", "r/.*/"]
...
}

 

6.     이제 cinder 볼륨을 설치합니다.

$ sudo apt-get install cinder-volume

 

7.     /etc/cinder/cinder.conf 파일을 열어 RabbitMQ 정보, Keystone 정보, Database 정보를 입력합니다.

$ sudo vi /etc/cinder/cinder.conf
[DEFAULT]
rpc_backend = cinder.openstack.common.rpc.impl_kombu
rabbit_host = 10.10.15.11
rabbit_port = 5672
rabbit_userid = guest
rabbit_password = rabbitpass
glance_host = 10.10.15.11
…
[keystone_authtoken]
auth_uri = http://10.10.15.11:5000
auth_host = 10.10.15.11
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = cinder
admin_password = cinderpass
...
[database]
connection = mysql://cinder:cinderdbpass@10.10.15.11/cinder

 

8.     환경설정이 끝나면 마지막으로 cinder 볼륨과 tgt를 재시작합니다.

$ sudo service cinder-volume restart
cinder-volume stop/waiting
cinder-volume start/running, process 8358
$ sudo service tgt restart
tgt stop/waiting
tgt start/running, process 8383



이렇게 해서 Neutron과 Cinder를 설치해 보았습니다. 다음시간에는 오브젝트 스토리지인 Swift와 미터링 서비스인 Ceilometer를 설치해보도록 하겠습니다. 그럼 다음 시간에 만나요~~~

최근에 올라온 글
최근에 달린 댓글
Total
Today
Yesterday
«   2024/03   »
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
글 보관함